RED LITH TAK GREASE

DESCRIPTION

RED LITH TAK possesses superior lubrication characteristics. It is recommended for bearing lubrication under all operating conditions from normal to unusually severe load service conditions. RED LITH TAK, which has a short fibre texture, is the prime recommendation for automotive, marine, industrial and agricultural applications. RED LITH TAK is manufactured with Lithium 12-hydroxy Stearate thickener and selected paraffinic and naphthenic Base Oils combined with Rust, Oxidation and Corrosion Inhibitors and a designed over treat of very effective extreme Pressure additives to more than cater for unusually high load service conditions.

SUMMARY OF BENEFITS

MULTI-PURPOSE GREASE for High and low Temperature applications (- 20C to 140C). Protects against wear on all moving parts from Shock Loadings to unusually High Load services. Prevents scuffing and further assists in wear prevention because SUPER RED LITH 2 has excellent characteristics not found in conventional EP greases. RED LITH TAK resists “SQUEEZE OUT” from surfaces requiring lubrication under high / load shock load conditions. Inherent adhesive and cohesive characteristics are synergised further with the activity of the special FP additives ensuring RED LITH TAK has the TENACITY to STAYPUT to always give effective lubrication. HIGH SHEAR STABILITY ensures long service life particularly in sealed antifriction bearing. The excellent resistance to mechanical shear combined with high film strength maintains grease consistency for extended lubrication service.
OXIDATION INHIBITED assuring long service life in sealed –for – life bearings. RUST and CORROAION INHIBITED promoting effective lubrication under difficult environments, which may be corrosive or rust prone situations. These inhibitors affect all metal components under these conditions. RECOMMENDATIONS INDUSTRIAL and GENERAL – Recommended for ball, roller, needle and slow speed plain bearings operating under all service conditions. Excellent service record under unusually high load and/ or shock load service conditions. AUTOMOTIVE – Recommended for chassis universal joints and wheel bearings particularly those in vehicles fitted with disc brakes where high temperature cause some greases to soften and give ineffective lubrication. For service in cars, trucks, tractors, etc.

SPECIFICATIONS

NLGI – 2
Colour – Red
Penetration @ 25c –
Worked 60 strokes d.217 275
Worked 10000 strokes d.217 292\
Dropping point, c d.2265 192
Water washout @ 80c d.1264 5
Wheel bearing leakage, g d.1263 3
Oxidation resistance pressure –
Drop, 100 hours kpa d.942 25
Timken, OK load Kg d.2509 28
4-ball weld, kg/f d.2296 380
4-ball wear scar, mm d.2266 0.42
Rust prevention characteristics d.1743 No Rust
Lithium soap, % mass 9.2
Mineral oil viscosity cSt @ 100 d.445 19.2
Maximum usable temperature 145

STORAGE

All packages should be stored under cover to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C.

HEALTH, SAFETY & THE ENVIRONMENT

Health, safety and environmental information is provided for this product in the relevant Materials Safety Data Sheet, which can be obtained by contacting Gulf Western Phone: 02 4732 3305.